Older homes have a charm that newer ones cannot copy, but some of what is inside the walls was designed for a very different way of living. A house built when the main electrical load was a few light bulbs and a radio was never meant to run a modern kitchen, a home office and an electric car charger. The wiring that tells that story best is called knob and tube.
Electricians such as Right Pro Electrical Services LLC, which lists knob and tube wire replacement among its residential services in the Houston area, are often called in when a homeowner discovers it, usually during an inspection, an insulation project or a renovation. Here is what it is and why it matters.
What It Looks Like and Where It Hides
The Center for Energy and Environment, a Minnesota nonprofit, explains the basics in an article titled Dealing with knob-and-tube wiring, written by Kevin Horkheimer and dated February 2025. It describes knob and tube as an older wiring system often identified by its rubber or asphalt-saturated cloth coating. It was phased out in the 1940s. Because the wiring is often hidden in attics and walls, its condition can be hard to judge.
Why It No Longer Meets the Standard
The article says the wiring does not meet modern electrical safety codes because it was designed for light loads. It also has no ground wire, which means no fault protection and a higher risk of shock or fire. Heat can make the coating brittle, which can expose live wires.
The Problem With Insulation
One of the practical consequences is an insulation project that cannot go forward. The article says insulation contractors will not insulate spaces that have active knob and tube wiring, and that most will want an electrician to confirm the wiring is inactive first. If it is active, it has to be replaced before the space can be insulated safely. The reason is that exposed live wires near insulation can be a fire risk.
Active or Inactive Comes First
The first thing the article recommends is having an electrician determine whether the wiring is active. Some old runs have been abandoned over the years, and some are still carrying current. That single question decides what happens next.
Planning a Replacement
If the wiring is active, the article suggests getting replacement quotes, ideally at least three, and considering upgrades such as added outlets or switches while the walls are open. It advises planning for a power outage during the work and keeping the invoice, since an insulation contractor or insurer may need proof that the wiring was replaced. If you are financing insulation work, it suggests asking your loan manager whether the electrical costs can be included.
What Affects the Cost
The article does not give a price. It says costs vary with the size of the house, how much wiring needs replacing, how accessible it is, any added outlets, and whether the service panel also needs an upgrade. Because those factors differ from house to house, written quotes from several companies are the only reliable way to compare.
Why This Applies Beyond Minnesota
The article comes from Minnesota and covers insulation programs there, and it does not mention Texas. Knob and tube was used across North America, though, so the description of the wiring and its risks applies to older homes anywhere. As general knowledge and not from the article, houses in some older Houston neighborhoods may still contain it, so ask an electrician if you are unsure.
About the Company Behind the Link
The website at the linked address belongs to Right Pro Electrical Services LLC, which says it is locally owned and operated in Houston, Texas, with over 20 years of experience and hours of Monday to Friday, 7 am to 7 pm, and Saturday, 7 am to 5 pm. Its listed residential services include rewiring, breaker panel replacement and inspection, whole-house surge protection, EV charging stations, knob and tube wire replacement, electrical home safety inspections, portable generator installation, remodels and landscape lighting. It lists a license number, TECL 31240, and a phone number of (713) 987-9781, and says customer satisfaction is guaranteed without describing warranty terms. Confirm the license with the state before you hire.





